Firmware & Manual
Upgrade the Matecam X1 FW instruction
1, Insert one memory card into the camera
2, Connect the camera to pc by USB cable, turn on the camera.
3, Copy the FWMT66.bin file into the root memory card.
4, Turn down the camera, and stay plugged
5, Turn on the camera again, it's upgrading now. The LED in motion detection mode will flash slowly.
6. The camera will Auto turn on when finish upgrading. and will Auto connect with pc again.
7. Then delete the file from the root memory card directly.
When you format the memory card, pls turn on the camera,and long press the shutter key 10s, then it will be formatted.